DEKORNIK Birch Forest Wallpaper

DEKORNIK Birch Forest Wallpaper

A wonderful wallpaper with a balanced pattern that will suit virtually any room. The birches and the Scandinavian composition of neutral white, gray, and brown colors are painted by Ewa Mąka Nawojczyk especially for us.

The trees are 110.2 inches high, the height of the wallpaper strip. Life-sized birds, located only toward the top of the wallpaper, measure up to 3.9 inches.

Dekornik is managed by two women Kasia and Paulina. We operate from Warsaw (where the main office is), London and... Sicily! That is why our wallpaper design is so colorful, joyful and diverse. We started as a small company and now we sell in over 20 countries around the world! 

We believe in design, originality, comfort and safety. Almost all our patterns are created by us. We are honest and we try to find fun in everything we do. Just like children, our biggest inspiration.

Features

Sizes

• Trees: 110.2 inches high - spanning the height of the wallpaper
  
• Birds: 3.9 inches
  
• The sizes of the strips are: 
• Height: 110.2 inches
  Width: 19.7 inches 

Notes

• Note, before applying any wall material, please prepare the wall thoroughly and clean the surface of dust or grease. Wallpaper can be glued on the walls only after approximately 20 days from the last painting.
• The only glue recommended for a wallpaper application is a water-based glue, easily found in a hardware store.

1. 1. For the application of the wallpaper prepare: a delicate wallpaper glue, a roller as for painting walls, a sharp paper knife. It is best to apply the wallpaper by two people, so an installation partner is very recommended.
   2. We start with the arrangement of the wallpaper on the wall. Here, please put the wallpaper against the wall. Then mark the plumb on the wall. 
   3. The adhesive is systematically applied ON THE WALL, on a surface slightly larger than the applied strip of wallpaper.
   4. Glue the strips one by one, from the top of the wall, so that one of the folded parts falls freely downwards.
   5. Then, match the pattern very carefully, matching the lengths of the wallpaper one by one.
   6. We connect the edges 'edge-to-edge' (do not put one on top of the other), delicately so as not to damage the wallpaper.
   7. If bubbles appear, gently pull them out with a soft roller, it will not damage the wallpaper.
   8. Cut off excess wallpaper near the floor with a paper knife.
   9. Excess glue can be removed with a damp sponge or cloth, but do not rub the wallpaper several times in the same place, so as not to damage it.

• You can only clean the wallpaper with a moist cloth but please be gentle.

Returns